42
Washer
Possible causes
What to do
Washer pauses
during the spin
cycle
This is
normal
The washer can be paused during the
spin cycle to remove water containing
soap more efficiently.
Can hear but not
see the water at
the end of the cycle
Washer won't
operate
Movement inside
machine when
turned off
This is
normal
Water supply
is turned off
Washer is disconnected
Controls are not
set properly
Lid is open – the
safety feature is
preventing agitation
and spinning when
the lid is open
The circuit breaker/
fuse is tripped/blown
Electronics need
to be reset
START was not pressed
Lid magnet is missing
Pump is leaving water at inlet and it is
diluted with soap and clean water.
Make sure cord is connected securely into a
working outlet.
Turn both hot and cold faucets fully on.
Check controls.
Close lid and restart cycle, from the
beginning if necessary.
Check house circuit breakers/fuses.
Replace fuses or reset breaker.
Washer should have a separate outlet.
isconnect washer, wait 2 minutes, connect
and press
START
.
Press START.
Call for service.
When the machine is turned off manually,
the shifter will disengage the motor
before completely shutting down
(only in spin)
.
If the lid is raised before the motor is
disengaged, it will resume when lid is
closed
(only in fill and wash)
.
Shifting mechanism is
disengaging to return
to initial position
(only in spin)
Possible causes
What to do
Performance
(washer)
D
Содержание MKTG15DNAVB
