4
OPERATING
INSTRUCTIONS
WARNING. Always
disconnect your vacuum
cleaner from the mains
supply before maintaining
and or assembling it.
Before you can start using your
vacuum cleaner you must attach the
hose (7)
and accessories.
1
Insert the
hose (7)
into the air
intake duct on the top of the
vacuum cleaner. Press until it
clicks into position. To remove
the
hose (7)
, press firmly on the
two release buttons on the hose
sleeve and remove the
hose (7)
from the intake duct. See fig. 1.
2
Fit the
extension tubes (2)
and
which ever other accessory is
required to the
hose (7)
. See fig. 2.
NOTE:
The
combination floor
nozzle (4)
has two settings. Each
can be selected by using the foot-
operated switch on the left hand side
of the nozzle. See fig.3.
(A) When cleaning hard floors,
the bristles should be in the
extended position.
(B) When cleaning carpets, the
bristles should be in the
retracted position.
NOTE:
The
crevice nozzle (12)
and
dusting brush (14)
are stored in
the recess at the rear of the vacuum
cleaner. See fig. 4.
3
The
crevice nozzle (12)
can be
used for crevices, corners,
baseboards and between
cushions. See fig. 5.
4
The
dusting brush (14)
is used
for furniture, blinds, books, lamp
shades and shelves. See fig. 6.
Fig. 1
Fig. 2
Fig. 3
Fig. 5
Fig. 6
Fig. 4
