Electrolux LTA13, Инструкция по эксплуатации, Страница: 14 / 48

14
8.5 Water Filter
Close the water inlet.
Disconnect the end of the hose
from the faucet and remove the
filter. Clean the filter with a flush of
water. If you have difficulties when
removing the impurities, use a small
soft brush. This procedure should
be done periodically to prevent clogging of the hose.
If the filter is damaged and needs to be changed,
call
the
Service Center.
Do not forget to replace the filter in the hose
and open the faucet again.
The product should not be used without the
filter at the risk of damaging the product.
8.6 Glass Lid
After each washing, clean it with a soft and moist
cloth.
Customer Assistance
If your product is not functioning correctly, check the probable causes and corrections. If the suggested
corrections are not sufficient, call the Service Center.
Never clean your washing
machine with flammable
fluids such as alcohol,
kerosene, gasoline, paint
thinner, solvents,
chemicals or use
abrasives products as
detergents such as acids or
vinegar.
WARNING
Problem Probable Causes Correction
If the washing
machine doesn't
work
The "Washing Programs" knob is
not positioned correctly.
Place the knob on the chosen program.
The LED light of the "ON/OFF" key is not
ON.
Press the key and wait for 5 seconds.
T he washing machine is in the soak cycle. Please wait until the end of the soak cycle.
The plug is not properly plugged in
the socket.
Check the plug and the socket where
the washing machine is connected.
The electrical circuit (socket, wires,
circuit breaker) is damaged.
Check the electrical circuit, and if
needed, call an electrician.
Blackout. Wait for the return of the power.
T he washing machine lid is opened. Close the lid.
It is been used with an adaptor or
extension cord.
Do not use adaptors or extension cord.
The supply voltage is low.
Call an electrician to check the electric
voltage in your home.
Wrong voltage .
Check the correct voltage for your
washing machine.
If agitation is low
The Delicate program was selected.
During the Delicate cycle the agitation is
slower to not damage clothing.
Wrong voltage.
Check the correct voltage for your
washing machine.
8.7 Outside
Clean it with warm water and neutral soap. After
cleaning, wipe it with a soft cloth. To avoid acci-
dentally turning the product on when cleaning, is
recommended to remove the plug from the socket.
9. Troubleshooting