13
Operating Instructions
7. Start the washer.
Close the door and press
start
. The washer
will not operate with the door open and
DOOR
OPEN
will be displayed.
Select
delay start
to delay the beginning of
the cycle for up to 14 hours if desired.
As a safety measure, the door will automati-
cally lock during the entire wash cycle.
To add a forgotten item to the washer any time
during the wash portion of the cycle, press
pause
. When the door unlocks, open the door,
add the item, close the door and press
start
to
resume the cycle.
If changes to the settings or options are at-
tempted after the cycle starts, you will hear
several beeps when the buttons are pressed.
To change the settings or options, press
pause
, make the new selections and press
start
again.
To change the cycle once the cycle has begun,
press
cancel
, select a new cycle, and press
start
again. Just turning the cycle selector
knob will not change the cycle.
To stop the cycle, press
cancel
.
NOTE
If the cycle is interrupted during spin, the door
lock will not release until the tub has stopped
spinning. DO NOT force open the door.
A signal will sound at the end of the cycle if the
chime
option has been selected.
Remove items from the washer when the cycle
ends and place in dryer, line dry or dry fl at as
directed on the fabric care label.
Excess wrinkling, color transfer or odors may
develop in items left in the washer after the
cycle has ended, if not removed promptly.
Follow the fabric care label instructions
on items to be washed.
For best results
OPERATING YOUR WASHER, continued
CAUTION
ENTRAPMENT and TIP-OVER HAZARD
An open door could entice children to hang on
the door or crawl inside the washer. If there are
no small children present, you may leave the
door ajar to prevent mildew and odor build up.
