Electrolux IC44819 FLF, Руководство по обслуживанию

Страница: 212 / 290

4
17
Service Option
Value Set 1 Set 2
T1: 150°C T2: 150°C T3: 150°C
C: 1 Fan1: 0 Fan2:0
Service
Manual
Control display
04106016/GB
43-09
Selecting Value mode
Note: pressing the middle button while in any of the menus allows you to exit Value mode and
return to Client Mode. The lateral buttons allow to go to the previous menu and to the
next menu.
When the push-button of the printed circuit is pressed,
the Service Option menu will appear on the screen.
It should be noted that the Service Option menus are
only displayed in English.
• The Value option allows you to view the values of
the settings (does not allow them to be altered).
Service Option screen
This screen displays the temperature values during
operation.
• Temperature T1 corresponds to the sensor on
the left-hand side of the cylinder.
• Temperature T2 corresponds to the sensor at
the centre of the cylinder.
• Temperature T3 corresponds to the sensor on
the right-hand side of the cylinder.
• The parameter C: gives information on the
heating :
- the digit 0 after the C means that the
heating is off
- the digit 1 after the C means that the
heating is on.
• The two following parameters give information
on the turning heat option:
1:0 = turning heat option on the left side is off
1:1 = turning heat option on the left side is on
2:0 = turning heat option on the right side is off
2:1 = turning heat option on the right side is on
It should be noted that pressing the centre button
will return you to Client mode.
The left-hand and right-hand side buttons allow you
to scroll through the various menus.
Cylinder temperature and heating parameters
display