Electrolux HOB890FMF, Руководство пользователя

Страница: 12 / 24

1. Touch the desired zone symbol first.
2. Touch or slide your finger to the
right to activate the function for the
chosen cooking zone.
The symbol turns red and becomes
bigger.
The function deactivates automatically.
To deactivate the function manually
select the zone and change its heat
setting.
For maximum duration
values, refer to "Technical
data".
7.6 Power Management
• Cooking zones are grouped according
to the location and number of the
phases in the hob. See the illustration.
• Each phase has a maximum
electricity loading of 3680 W.
• The function divides the power
between cooking zones connected to
the same phase.
• The function activates when the total
electricity loading of the cooking
zones connected to a single phase
exceeds 3680 W.
• The function decreases the power of
the other cooking zones connected to
the same phase, which has an
influence on the available heat
setting.
• The maximum heat setting is visible
on the slider. Only the digits in white
are active.
• If a higher heat setting is not available
reduce it for the other cooking zones
first.
7.7 Bridge function
This function connects two cooking
zones and they operate as one with the
same heat setting.
You can use the function with large
cookware.
1. Place the cookware on two cooking
zones. The cookware must cover the
centres of both zones.
2. Touch to activate the function.
The zone symbol changes.
3. Set the heat setting.
The cookware must cover the centres of
both zones but not go beyond the area
marking.
To deactivate the function, touch . The
cooking zones operate independently.
7.8 Timer
+STOP
Count Down Timer
Use this function to specify how long a
cooking zone should operate during a
single cooking session.
You can set the function for each
cooking zone separately.
1. Set the heat setting for the
appropriate cooking zone first and
then set the function.
2. Touch the zone symbol.
3. Touch .
www.electrolux.com 12