Electrolux FA41-402GY, Инструкция

Страница: 7 / 40

www.electrolux.com 7
TROUBLESHOOTING
Can the filters be washed?
The control panel does
not seem to work.
The equipment emits a lot
of noise.
The equipment operates
normally but the outgoing
air volume is significantly
reduced.
If the fault encountered is not listed above, please call the Customer Service Hotline.
When fault indicators show that the system is not operating properly, perform the following check.
NO
Power issue or the filter
compartment if unlocked. Check if the equipment is powered
on and confirm whether the filter
compartment door is locked.
Replace the compound filter instead
of wash, the pre-filter can be wiped.
The installation location is not
at even level or the filter is not
properly inserted. Install the equipment on a level
surface and re-confirm filter
installation position and order.
The outlet might be blocked by
a foreign object or the filter has
not been replaced in a timely
manner. Please re-adjust the equipment
installation position to ensure enough
space is reserved, and confirm that
filter have been replaced according to
filter replacement indicator status.
Questions or Faults Corrective Steps / Reasoning
Commonly Asked Questions & Topics
Carry out the operations below for commonly-occurring questions or faults.
Possible Diagnosis