6.
OPERATION INSTRUCTION
Temperature controler
The temperature knob adjusts water
temperature by increase/decrease the
water flow:
- Clockwise rotate, decrease water
flow, water temperature increases
- Anti-clockwise rotate, increase water
flow, water temperature decreases.
On/off button
Control the shower unit's electricity
and working start/stop, when push on,
water flows out, when push off, water
stops.
NOTE:
When you press the On/off button
to start the unit water start to flow out from
the showerhead. To avoid too hot or too
cold water flow, do not let showerhead
point directly to human body.
6.2
Before first use
6.1
Product features
Before normal operation of the shower, it is
essential that the following commissioning
procedure is completed correctly.
The following operation is intended to flush
out any remaining debris, and to make sure
the heater unit contains water before the
heating elements are switched on.
1.
Make sure the flexible hose is screwed
to the water outlet but WITHOUT THE
SHOWERHEAD ATTACHED and the outlet
of the flexible hose is directed to waste.
2.
Before turning on the electric and mains
water supplies to the shower, make sure that
the Heating power knob is at the “COLD”
position and the temperature knob is turned
fully clockwise to ‘MINIMUM’ flow
(Fig.15).
CAUTION!
Heating power selector
This knob is used to adjust heating
power. There are 4 positions
cold “ ”, I(ECO) “ ”, II “ ” and
III “ ”, each adjustment is 90°. The
higher the power, the higher the outlet
temperature.
Fig. 15
18 www.electrolux.com
1
2
3
Turn the Heating
power knob
to COLD.
Turn the temperature
knob fully clockwise
to “MINIMUM” flow.
2
3
1
Fig. 14
