Electrolux EXP09CN1W Скачать руководство пользователя страница 19

Страница: 19 / 39



6.9 Some standard functions synopsis

6.9.1. Timer function

When the unit is on, press the Timer button will initiate the Auto-off stop program, the TIMER OFF

indicator light illuminates. Press the UP or down button to select the desired time. Press the TIMER

button again within 5 seconds, the Auto-on start program is initiated. And the TIMER ON indicator light

illuminates. Press the up or down button to select the desired Auto-on start time. When the unit is off,

press the Timer button to initiate the Auto-on start program, press it again within five seconds will

initiate the Auto-off stop program. Press or hold the UP or DOWN button to change the Auto time by 0.5

hour increments, up to 10 hours, then at 1 hour increments up to 24 hours. The control will count down

the time remaining until start. The system will automatically revert back to display the previous temper

ature setting if there is no operation in a five seconds period.

6.9.2. Sleep function

Press this button, the selected temperature will increase (cooling) or decrease (heating) by 1

℃

℉

30 minutes. The temperature will then increase (cooling) or decrease (heating) by another 1

℃

℉

after an additional 30 minutes. This new temperature will be maintained for 7 hours before it returns to

the originally selected temperature. This ends the Sleep mode and the unit will continue to operate as

originally programmed.

Содержание EXP09CN1W








































Результаты поиска

Содержание EXP09CN1W

Отзывы:

Бренды по названию

Популярные бренды

Electrolux EXP09CN1W, Руководство по обслуживанию

Результаты поиска

Содержание EXP09CN1W

Отзывы:

Бренды по названию

Популярные бренды