Electrolux EWW12742, Руководство пользователя

Страница: 28 / 112

28 www.electrolux.com
10.7 Cleaning The Pump
The appliance does not drain the
water.
The drum cannot turn.
The appliance makes an unusual
noise because of the blockage of
the drain pump.
The display shows an alarm code
because of the problem with
water drain.
Regularly examine the drain pump
and make sure that it is clean.
Clean the pump if:
1. Disconnect the mains plug
from the mains socket.
2. Do not remove the filter while
the appliance operates. Do
not clean the drain pump if
the water in the appliance is
hot. The water must be cold
before you clean the drain
pump.
WARNING!
To clean the drain pump:
1. Open the drain pump door.
2. Pull the flap down.
3. Put a container below the recess
of the drain pump to collect the
water that flows out.
4. Press the two levers and pull
forward the drainage duct to let
the water flow out.
5. When the container is full of water,
put the drainage duct back again
and empty the container. Do
steps 4 and 5 again and again
until no more water flows out from
the drain pump.