Electrolux EWW1142Q7WB, Руководство пользователя

Страница: 14 / 96

14 www.electrolux.vn
3.4 Options
1)
Hygienic Care
option can be combined with temperature 40°C to 90°C only.
2) Do not select a spin speed LOWER than that proposed by the appliance to avoid a too long
drying time so saving energy. In any case the reduction of the spin speed is only possible after
selecting drying.
3) This program can select only “Cupboard Dry” option.
3.3 Program Options Compatibility
Wash/Dry Mode Touchpad
This touchpad is used to select Program Mode
of your machine. Program modes available are:
Wash Only Mode (default)
●
Wash and Dry Mode
●
Dry Only Mode
●
/
Changing a running program mode is
possible only by switching off the
machine.
Temperature Touchpad
Press this touchpad repeatedly to
increase or decrease the wash
temperature if you want your laundry to
be washed at a temperature different
from the one proposed by the
Washer-Dryer.
Spin Selection Touchpad
Press this touchpad repeatedly to increase
or decrease the spin speed or select Rinse
Hold, if you want your laundry to be spun
at a speed different from the one proposed
by the Washer-Dryer.
If a mode is not compatible with program
selected, the symbol “ ” will flash on
display along with buzzer sound.
Program
Option
Cottons
Mixed
Bedding
Energy Saver
Vapour Refresh
App Program
Spin
Rinse + Spin
Quick 15
Daily 39
Wool
Delicates
Favourite
WashDry 60
1)
2)
3)
2)
Dryness
Level
Prewash Time
Dry
Hygienic
Care
Sensor
Wash
No
Spin
Rinse
Hold
Delay
Start
Full Wash 60
The door stays locked with the
water in the drum. To continue
the cycle, you must press
(Start/Pause).
●
●
No spin option eliminates all the spin
phases and increase the number of
rinses.
No Spin ( )
By selecting this option the water of
the last rinse is not emptied out and
the drum turns regularly to prevent the
laundry creases.
The door is still locked to indicate that
the water must be emptied out.
Rinse Hold ( )
( ) Touchpad
Select “ ” option to turn ON
the sensors for the dirt and detergent
residue.
The initial time displayed on
the control panel indicates the
time needed for the maximum
dirt level.
Please see details of detergent
usage at “Detergents Type and
Quantity of Detergent”
When using this option, machine will
automatically check the dirt level and
detergent residue* in your laundry. It will
automatically adjust the washing time
and numbers of rinses according to the
load to make sure that your clothes are
really clean.
The SensorWash technology consist of 2
different sensors for detection:
1) The 1
st Turbidity sensor detects the
dirt level at the start of cycle and
automatically calculates the actual
time needed to remove the level of
dirt in the wash; from low dirt levels
all the way to the maximum dirt level.
2) The 2 nd Conductivity sensor will check
the amount of detergent residue after
the first rinse and the machine will
calculate the optimum number of
rinses (Maximum of 2 additional
rinses) needed to make sure that the
detergent residue is properly removed.
* Only for liquid detergent