ENGLISH
Attention! Before selecting programme
the
selector dial has to be positioned on
X
(cancelling).
• Depress START/PAUSE button
: after
emptying, the machine performs the spin cycle
corresponding to the type of fabric previously
selected.
• Select the spin speed by means of the relevant
button and then depress the START/PAUSE
button.
This option cannot be selected for the automatic
WASHING & DRYING programme.
7 Quick wash button
By pressing this button the washing time is reduced
as follows:
• 62 minutes for cotton 95°C
• 73 minutes for cotton 60°C
• 42 minutes for synthetics
• 9 minutes for delicates
This option is not available with the wool
programme and the Energy saving programmes.
To be used for lightly soiled laundry.
8 Extra rinse button
Can be used with all programmes except the wool
programme. The machine performs 4 rinses instead
of 3.
This option is recommended for people who are
allergic to detergents and in areas where the water
is very soft.
9 Drying Time button
If you wish to carry out a timed programme push the
button until the drying time you want appears in the
display according to the fabrics (cotton or
synthetics) you have to dry.
For COTTON you can select a drying time from 10
minutes to 130 minutes.
For SYNTHETICS you can select a time from 10
minutes to 100 minutes.
10 DELAY START button
The wash programme can be delayed from 1 hour
up to a maximum of 24 hours by means of this
button.
• Switch the machine on by depressing the ON/OFF
button .
• Select the programme and the required options.
• Select the delay start.
• Depress START/PAUSE button
: the machine
starts its hourly countdown.
The programme will start after the selected delay
has expired.
• Depress START/PAUSE button
.
• Depress DELAY START button until the required
time is displayed.
If you wish to cancel the delay, depress the button
only once: the symbol
0
h is displayed.
• Depress START/PAUSE button again.
11 DISPLAY
The display shows the following information:
Cancelling - Duration/End of the programme -
Drying time - Delayed start - Incorrect option
selection - Alarm code.
If a programme has been cancelled - programme
selector dial on position
X
- three flashing dashes
appear on the display.
Now you can select a new programme.
---
Cancelling
Altering the delayed start
Selecting the delayed start
11
132992810gb.qxd 04/09/2003 09:41 Pagina 11