Electrolux EWUD040B8B, Руководство пользователя

Страница: 71 / 204

Problem Possible cause Solution
There is no voltage in the
mains socket.
Connect a different electrical
appliance to the mains sock‐
et, to check if electricity is
flowing. If not, contact a
qualified electrician.
The circuit breaker trip‐
ped or a blown fuse.
Turn on the circuit breaker or
change the fuse.
The compressor operates
continually.
Temperature is set incor‐
rectly.
Refer to the "Operation"
chapter.
The room temperature is
too high.
Refer to the "Installation"
chapter.
The door is opened too
often.
Do not keep the door open
longer than necessary.
The door is not closed
correctly.
Refer to the "Closing the
door" section.
The light does not work. The light is turned off. Turn on the light. Refer to
the "Light setup" section.
The appliance is not
plugged in.
Connect the appliance.
The circuit breaker trip‐
ped or a blown fuse.
Turn on the circuit breaker or
change the fuse.
The lamp is defective. Contact the service.
The light button is not op‐
erating.
Contact the service.
Too much vibration. The appliance is not sup‐
ported properly.
Check if the appliance
stands stable.
The appliance is noisy. The appliance is not sup‐
ported properly.
Check if the appliance
stands stable.
Water flows on the rear
plate of the appliance.
During the automatic de‐
frosting process, frost
melts on the rear plate.
This is correct.
Water flows inside the
wine cabinet.
The appliance drains are
clogged
Clean the appliance drain
holes Refer to the "Cleaning
the drain" section.
Water flows inside the
wine cabinet.
Products prevent that
water flows into the water
collector.
Make sure that products do
not touch the rear plate.
The temperature in the
wine cabinet is too low or
too high.
The temperature regula‐
tor is not set correctly.
Set a higher or lower tem‐
perature.
ENGLISH 71