Electrolux EWT959, Руководство пользователя

Страница: 23 / 26

Fault information and a guide for when you should call for service
The following messages appear on the LCD screen of your washing machine if a problem has been diagnosed.
Fault Display messages are shown on the left hand display screen.
4HEåDISPLAYåISåACCOMPANIEDåBYå@"EEPINGåASåSHOWNåINåTHEå"EEPINGåCOLUMN
<WkbjZ_ifbWoÅb[\jiYh[[d
Beeping Problem Action to take
The machine cannot fill.
Please turn on wall taps
and then press
START/PAUSE. The
machine will then resume
operation
"EEPINGå
continuously
Not filling with
water Make sure both wall taps are on, and hose filters not
blocked.
Raise drain hose if water flowing out of drain hose.
Press Start/Pause to re-start wash.
If problem remains, call Service.
Flood. Is there water
pouring into the bowl?
YES --> Turn off wall taps
and machine. Call Service.
./åå7AITåFORåTHISåFAULTåTO
self-clear
"EEPINGå
continuously
7ATERåISåNOTå
turning off
If water is pouring onto the floor, turn both wall taps
/&&å7AITåAåFEWåMINUTESåTOåSEEåIFåFAULTåISåCORRECTEDååIFå
not, call Service.
Draining difficulty
"EEPINGå
5 secs in
every
10 secs
7ATERåNOTå
draining
correctly
The pump will switch off and on repeatedly to clear any
blockage.
7AITåAåFEWåMINUTESåTOåSEEåIFåTHEåFAULTåISåCORRECTED
If not, press Start/Pause then check the drain hose for
blockage. Press Start/Pause to continue wash.
If problem remains, call Service.
The machine cannot do a
wash. Call Service
"EEPINGå
5 secs in
every 10 secs
Control panel
not functioning
properly Press Power button to turn machine off machine.
Restart the machine.
If problem still exists, call Service.
The motor cannot run.
Select DRAIN&SPIN and
press START/PAUSE
to drain water from bowl,
then call Service.
OR
The motor cannot run.
Select DRAIN&SPIN to
drain water from bowl,
then call Service.
"EEPINGå
5 secs in
every 10 secs
Faults related to
motor & drive
system
7AITåTHEåPROBLEMåMAYåSELFåCLEAR
If not, select DRAIN&SPIN to drain water from bowl. You
may have to press Start/Pause to commence draining.
If this problem is repeatedly experienced, call Service.
Level sensor fault.
Select DRAIN&SPIN and
press START/PAUSE to
drain water from bowl,
then power down, then
call Service.
"EEPINGå
continuously
7ATERåLEVELå
sensor not
operating
correctly
The machine will only permit draining.
Select DRAIN&SPIN, then press Start/Pause to drain
water from machine.
7HENåEMPTYåPRESSå0OWERåTOåSWITCHåOFFåMACHINEåANDå
call Service.
Cannot agitate.
Select DRAIN&SPIN and
press START/PAUSE to
drain water from bowl,
then call Service.
"EEPINGå
5 secs in
every 10 secs
Recirculation
pump fault If this problem is repeatedly experienced, call Service.
Should you require further instructions in the care and use of your washing machine please contact Customer Care on the
numbers shown on the back page.
Troubleshooting fault displays
electrolux water aid washing machine troubleshooting fault displays 19