Troubleshooting
Problem
Possible causes
What to do
Clothes still dirty after
wash program.
Not enough or no detergent.
Check detergent use and rewash clothes.
Too many clothes in load.
Remove some clothes and rewash.
Incorrect Fabric, Dirt or water Temp.
selected.
Reselect settings.
Incorrect water level selected.
Use Auto water level or a higher manual water level and
rewash clothes.
Residues on clothes
after the wash
Undissolved detergent, dirt or lint not
being dispersed during washing.
Read the section Residues on washed items on page 15 for
tips to help you.
Clothes still wet or
sudsy after wash
program
Poor rinsing and spin due to excessive
suds causing a suds lock condition in the
machine.
In future use less detergent & ONLY use a low sudsing,
front load washer detergent in this machine, such as Cold
Power for Front Loaders and High Efficiency Top Loaders or
detergent labelled “Matic”.
Scraping noise on spin.
"RAåWIREåORåOTHERåTHINåITEMåCAUGHTå
between inner and outer washbowls.
If item is visible, remove with pliers.
Use wash bag in future.
Humming, clicking
and other intermittent
noises.
"OWLåROTATIONåATåSTARTåOFåWASH
Normal noise.
7ATERåmOWCASCADEåNOISEåFROMå
recirculated water entering washbowl
Normal noise that may be heard during water recirculation
when pump is ON.
Lid will not open
Machine is at a spin stage and
‘SAFETY Lid is locked’ is on screen.
If you want to access the bowl, wait until stage is complete
and ‘SAFETY Lid is locked’ disappears. Then you can open
the lid.
At end of wash. Machine is finishing final
spin & the lid lock release stage.
7AITåAåSHORTåWHILEåUNTILå@3!&%49å,IDåISåLOCKEDåDISAPPEARSå
from screen.
Lid may be stuck in the locked position.
If ‘SAFETY Lid is locked’ is not on screen, press Power to
turn off machine, then press Power again. If lid still will not
open you should call Service.
18 troubleshooting
electrolux water aid washing machine
Содержание EWT959
Страница 1: ...user manual mWj h W_Z mWi _d cWY _d EWT959 ...
Страница 25: ......