Electrolux EWN 148641 W, Руководство пользователя

Страница: 9 / 32

Important! If you turn the programme
selector dial to another programme when the
machine is working, the display says to turn
programme selector in the last used position.
The machine will not perform the new selec-
ted programme.
Display
The DISPLAY is used for setting a large
number of functions and combine them
with each other using only a few control
elements (1 programme selector dial
and 8 buttons). This simple control
method is made easy thanks to the in-
teractive display. Interactive means that
the appliance display changes to reflect
each step you have entered. This en-
sures to set the possible settings only.
You are able to see the current settings
at any time in the information panel and
in the option rows.
The display shows the following information:
•
Duration of the selected programme
After selecting a programme, the duration
of the washing programme (
2.5 ) and the
extimated end of cycle ( 2.6 ) are displayed
in hours and minutes (for example 20:33 ).
The duration is calculated automatically on
the basis of the maximum recommended
load for each type of fabric.
After the programme has started, the time
remaining is updated every minute.
• Programme progress display
After you have pressed the button 7 , the
display shows the running phase. On the
display you can see the symbol of the se-
lected type of fabric, the current phase, the
duration of the wash programme and the
end of cycle. When the machine performs
the washing phase the display shows also
some animated bubbles that simulate the
moving of the water.
See the below picture:
• Delay
The selected delay time value (up to 20
hours max.) appears in the position
2.5 of
the display (when the appliance start op-
erating) close to the relevant icon
that it
is lighted-on. The delay time value decrea-
ses every minute.
• Alarm codes
In the event of operating problems, some
alarm codes can be displayed, for example
«Cannot fill water. Please check that the
tap is open and then press START/
PAUSE» (see the chapter «What to do
if...»).
• End of programme
When the programme has finished the dis-
play says that the door is unlocked and the
washing cycle is finished appear alterna-
tively. The door
icon remains on to in-
form that the wash cycle has finished and
the door can be opened.
Programme Option buttons
Depending on the programme, different
functions can be combined. These must
be selected after choosing the desired
programme and before pressing the
button
7 .
Important! For the compatibility among the
washing programmes and options, refer to
«Washing programmes».
Select the temperature (button 3)
Press the button 3 repeatedly to in-
crease or decrease the temperature, if
you want your laundry to be washed at
a temperature different from the one
proposed by the appliance (position
2.1 in the display).
Important! To see the maximum and
minimum temperatures allowed for each
washing programmes, refer to «Washing
programmes».
= Cold Wash.
Select the spin speed or the available
options (button 4)
Press the button 4 repeatedly to change the
spin speed, if you want your laundry to be
spun at a speed different from the one pro-
posed by the appliance.
electrolux 9