Electrolux EWM 1046 EEU, Руководство пользователя

Страница: 14 / 24

• The drain pump can operate for a short
time when the appliance fills water.
After approximately 15 minutes
from the start of the programme:
• The appliance adjusts automati-
cally the programme duration
agree with the laundry load.
• The display shows the new val-
ue.
9.5 Starting a programme with
delay start
• Press
again and again until the dis-
play shows the delay you want to set.
The related indicator comes on the dis-
play.
• Press :
– The appliance starts the countdown.
– When the countdown is completed,
the programme starts automatically.
You can cancel or change the set
of the delay start before you press
.
To cancel the delay start:
1. Press to set the appliance to
pause.
2.
Press until the display shows ’.
Press again to start the pro-
gramme immediately.
9.6 Interrupting a programme
and changing the options
You can change only some options be-
fore they operate.
1. Press . The indicator flashes.
2. Change the options.
3. Press again. The programme con-
tinues.
9.7 Cancelling a programme
1.
Turn the programme knob to to
cancel the programme and to deacti-
vate the appliance.
2. Turn the programme knob again to
activate the appliance. Now, you can
set a new washing programme.
The appliance does not drain the
water.
9.8 Opening the door
While a programme or the delay start op-
erates, the appliance door is locked and
the display shows the indicator
.
CAUTION!
If the temperature and level of the
water in the drum are too high,
you cannot open the door.
Open the appliance door when the
delay start operates:
1. Press to pause the appliance.
2.
Wait until the door lock indicator
goes off.
3. You can open the door.
4. Close the door and press again.
The delay start continues to operate.
Open the appliance door when the
programme operates:
1.
Turn the programme knob to to
deactivate the appliance.
2. Wait for some minutes and then open
the appliance door.
3.
Close the appliance door.
4.
Set the programme again.
9.9 At the end of the
programme
• The appliance stops automatically.
• The acoustic signal operates (if it is acti-
vated).
• In the display a
comes on.
• The indicator goes off.
• The door lock indicator
goes off.
• Remove the laundry from the appliance.
Make sure that the drum is empty.
• Keep the door ajar, to prevent the mil-
dew and odours.
• Close the water tap.
• Press the button for some seconds
to deactivate the appliance.
The washing programme is
completed, but there is water in the
drum:
– The drum turns regularly to prevent the
creases in the laundry.
14 www.electrolux.com