Electrolux EWM 1000 PLUS Скачать руководство пользователя страница 11

Страница: 11 / 59

SOI/DT 2005-07 dmm

11/59

599 37 22 15

4.5.10 Sensitive

Adds one rinse in the COTTON – SYNTHETIC FABRICS cycles.

During the cotton cycles the movements pass from vigorous to normal.

Eliminates the intermediate spins except from the last two which are ar reduced speed.

4.5.11 Bleach

Ducts water through the bleach compartment at the beginning of the first rinse in COTTON cycles.

Pre-wash is possible only if there are three solenoids.

In models with two solenoids, the bleach option is not compatible with the pre-wash option.

4.5.12 “Half load” button

Eliminates one rinse in the COTTONS programmes.

4.5.13 Easy-Iron

•

In COTTON programmes:

Adds three rinses.

Eliminates the intermediate spins.

Performs an impulse spin phase.

Adds an “untangling” phase after the spin cycle.

•

In SYNTHETICS cycles:

Reduces the temperature in 50/60° cycles to 40°C.

Increases the washing time.

Prolongs the cooling phase at the end of the washing phase.

Adds one rinse without spin cycle.

Adds an “untangling” phase after the impulse spin cycle.

4.5.14 Reduced spin speed

Reduces the speed of

all

spins as shown in the table.

Maximum spin speed (rpm)

600

700

800

900 1000 1100 1200 1300 1400 1500 1600

Reduction for COTTON (rpm)

450

500

550

600 650 700 750

800

Reduction for ALL OTHER CYCLES (rpm)

450

450 450 450 450

450

4.5.15 No spin

Eliminates

all

the spin phases.

Three rinses are added in the COTTON cycle and one in the SYNTHETICS cycle.

4.5.16 Modifying the spin speed

Reduces the speed of

all

spin cycles.

The last position can be used for NO SPIN, RINSE-HOLD.

If the NO-SPIN option is selected, three rinses are added in the COTTON cycle, and one in the

SYNTHETICS cycle.

4.5.17 Time reduction (Quick)

Modifies the structure of the COTTON - SYNTHETICS– DELICATES programmes to obtain very short

washing times (optimization for small or lightly-soiled loads).

Reduces the number of rinses (one rinse less).

Increases the water level of the other two rinses.

Corresponds to the SHORT- VERY SHORT cycles according to the configuration of the appliance.

Содержание EWM 1000 PLUS




























































Результаты поиска

Содержание EWM 1000 PLUS

Отзывы:

Похожие инструкции для EWM 1000 PLUS

Бренды по названию

Популярные бренды

Electrolux EWM 1000 PLUS, Руководство по обслуживанию

Результаты поиска

Содержание EWM 1000 PLUS

Отзывы:

Похожие инструкции для EWM 1000 PLUS

Бренды по названию

Популярные бренды