background image

Cleaning the drawer recess

Having removed the drawer, use a
small brush to clean the recess,
ensuring that all washing powder
residue is removed from the upper and
lower part of the recess.

Insert the detergent dispenser drawer
in the guide rails and push it in.

Washing drum

Rust deposits in the drum may occur
due to rusting foreign bodies in the
laundry or tap water containing iron.

Important! 

Do not clean the drum with

acidic descaling agents, scouring
agents containing chlorine or iron or
steel wool.

1. Remove any rust deposits on the

drum with a cleaning agent for
stainless steel.

2. Run a washing cycle without any

laundry to clean off any cleaning
agent residues. Programme:
COTTONS/LINEN 90° or 95°C,
press button 

9

to select Super

Quick option, add approx. 1/4
measuring cup of detergent.

P0038

Door seal

Check the door seal from time to time
and remove any objects that could be
trapped in the fold.

Cleaning the pump

The pump should be inspected if
• the machine does not empty and/or

spin 

• the machine makes an unusual noise

during draining due to objects such
as safety pins, coins etc. blocking
the pump. 

Proceed as follows:
• Disconnect the appliance. 
• If necessary wait until the water has

cooled down.

• Place a container close to the pump

to collect any spillage. 

BI0001

B

A

P10

5

0

care and cleaning

electrolux  

23

132964640.qxd  19/07/2008  12.01  Page 23

Содержание EWG 12750 W













































Отзывы: