Electrolux EWF 168547 W, Руководство пользователя

Страница: 11 / 32

• Pour the liquid detergent in the compart-
ment without exceeding the limit indi-
cated in the flap.
• Close the dispenser drawer.
Warning! Do not use the flap in
"DOWN" position with:
• Gelatinous detergent or thick deter-
gent.
• Powder detergent.
• With programmes with prewash.
• Do not use liquid detergent if the
washing programme doesn't start
immediately.
In these cases, use the flap in "UP"
position .
Select the required programme by
turning the programme selector dial (1)
Turn the programme selector dial to the re-
quired programme. The washing machine
will propose a temperature and automati-
cally select the maximum spin value provi-
ded for the programme you have chosen.
You can change these values by operating
the corresponding buttons. The
green pilot
light of the button 8 starts to flash.
The selector dial can be turned either clock-
wise or counterclockwise. Turn to position
to reset programme/Switching the ma-
chine off.
At the end of the programme the selec-
tor dial must be turned to position
,
to switch the machine off.
Caution! If you turn the programme
selector dial to another programme
when the machine is working, the
red
pilot light of button 8 will blink 3 times
and the message Err is displayed to
indicate a wrong selection. The
machine will not perform the new
selected programme.
Select the temperature by pressing
button 3
By selecting a programme, the appliance
proposes automatically a default tempera-
ture.
Press this button repeatedly to increase or
decrease the temperature, if you want your
laundry to be washed at a different temper-
ature.
Reduce the spin speed by pressing
button 4
By selecting a programme, the appliance
proposes automatically the maximum spin
speed provided for that programme.
Press button
4 repeatedly to change the
spin speed, if you want your laundry to be
spun at a different speed.
Select the available options by
pressing buttons 4, 5 and 6
Depending on the programme, different
functions can be combined. These must be
selected after choosing the desired pro-
gramme and before pressing button
8 .
When these buttons are pressed, the corre-
sponding icons appear on the display.
When they are pressed again, the icons
disappear. If an incorrect option is selected,
the integrated
red pilot light of the button 8
flashes for 3 times and the Err message
appears on the display for a few seconds.
For the compatibility among the wash-
ing programmes and the options see
chapter «Washing Programmes».
Select the Delay Start by pressing
button 7
Before you start the programme, if you wish
to delay the start, press the button
7 re-
peatedly, to select the desired delay. The
corresponding icon
2.6 will appear on the
display in the upper part of the display.
electrolux 11