Electrolux EW9W8862E9 Скачать руководство пользователя страница 18

Страница: 18 / 60

Spin speed indicator.

Rinse hold indicator.

Extra silent indicator.

Pre-wash indicator.

Stain indicator.

Delay start indicator.

8. DIAL AND BUTTONS

8.1 On/Off

Pressing this button for a few seconds

allows to activate or deactivate the

appliance. Two different tunes sound

while switching the appliance on or off.
As the Stand-by function automatically

deactivates the appliance to decrease

the energy consumption in a few cases,

you may need to activate the appliance

again.
For more details, refer to Stand-by

paragraph in Daily Use chapter.

8.2 Introduction

The options/functions are

not selectable with all

washing programmes.

Check the compatibility

between options/functions

and washing programmes in

the "Programme Chart". An

option/function can exclude

another one, in this case the

appliance doesn't allow you

to set the incompatible

options/functions together.

Make sure the screen and

touch buttons are always

clean and dry.

8.3 Temperature

When you select a washing programme,

the appliance automatically proposes a

default temperature.

Touch this button repeatedly until the

desired temperature value appears on

the display.
When the display shows the indicators

and

, the appliance does not heat

the water.

8.4 Spin

When you set a programme, the

appliance automatically selects the

default spin speed.
Touch this button repeatedly to:

• Change the spin speed.

The display shows only

the spin speeds available

for the set programme.

• Activate the Rinse Hold option .

The water of the last rinse is not

drained out to prevent the fabrics from

creasing. The washing programme

ends with water in the drum and the

final spin phase is not performed.
The display shows the indicator

The drum turns regularly to reduce

creasing.

The door stays locked. The drum

turns regularly to reduce creasing.

You must drain the water to unlock

the door.

Touch Start/Pause button: the

appliance performs the spinning

phase and drains the water.

• Activate the Extra silent option.

All spinning phases (intermediate spin

and final spin) are suppressed and

www.electrolux.com

Содержание EW9W8862E9





























































Результаты поиска

Содержание EW9W8862E9

Отзывы:

Похожие инструкции для EW9W8862E9

Бренды по названию

Популярные бренды

Electrolux EW9W8862E9, Руководство пользователя

Результаты поиска

Содержание EW9W8862E9

Отзывы:

Похожие инструкции для EW9W8862E9

Бренды по названию

Популярные бренды