programme dial are deactivated
(except On/Off button ).
• Before you touch the Start/Pause
button: the appliance cannot start.
The appliance keeps the selection of this
option after you switch it off.
12.2 Acoustic signals
This appliance is provided with different
acoustic signals, that operate when:
• You activate the appliance (special
short tune).
• You deactivate the appliance (special
short tune).
• You touch the buttons (click sound).
• You make a wrong selection (3 short
sounds).
• The programme is completed
(sequence of sounds for about 2
minutes).
• The appliance has a malfunction
(sequence of short sounds for about 5
minutes).
To deactivate/activate the acoustic
signals when the programme is
completed, touch the Delay Start and the
Quick buttons simultaneously for about 6
seconds.
If you deactivate the
acoustic signals, they
continue operate when the
appliance has a malfunction.
12.3 Permanent Extra Rinse
With this option you can permanently
have one or two extra rinses when you
set a new programme.
• Simultaneously touch the
Temperature button and the Spin
button once to add one extra rinse.
appears on the display.
• Simultaneously touch the
Temperature button and the Spin
button twice to add two extra rinses.
appears on the display.
• Simultaneously touch the
Temperature button and the Spin
button three times to remove extra
rinses. The display only shows
.
13. DAILY USE
WARNING!
Refer to Safety chapters.
13.1 Using weight sensors
For a correct use of the
weight sensor, the drum
must be empty when
activating the appliance.
Set the programme
BEFORE you put the
laundry in the drum.
13.2 Before activating the
appliance
1. Make sure that the mains plug is
connected to the mains socket.
2. Make sure that the water tap is open.
13.3 Activating the appliance
and setting a programme
1. Press button On/Off for a few
seconds to activate the appliance.
The programme dial is automatically set
on default programme and only the
Wash indicator is on.
The indicator of Start/Pause button
flashes.
2. Turn the programme knob to the
necessary programme.
The programme indicator comes on.
The display shows the maximum load,
the default temperature, the maximum
spin speed, the indicators of the phases
making up the programme and the
programme duration.
3. If it is necessary, touch the
Temperature button and the Spin
button to change the water
temperature and the spin speed.
4. If necessary, touch the related
buttons to add some options and/or
to set a delayed start.
The display shows the symbol of the set
option and/or the digit shows the delayed
time.
www.electrolux.com
30
Содержание EW9W8862E9
Страница 1: ...EW9W8862E9 EN Washer Dryer User Manual ...
Страница 57: ......
Страница 58: ......
Страница 59: ......