34
Place the laundry in the drum
Open the door.
Place the laundry in the drum, one item at a time,
shaking them out as much as possible.
Close the door.
Measure out the detergent
Pull out the dispenser drawer until it stops.
Measure out the amount of detergent recommended
by the manufacturer in a graduated cup and pour it
into the main wash compartment
. If you wish to
carry out a prewash, pour detergent into the
appropriate compartment marked
.
Measure out the additives
If required, pour fabric softener into the compartment
marked
and the bleaching agent in the
compartment marked
without exceeding the
«MAX» mark.
Select the desired option(s)
Select the temperature
Turn the selector dial to the required temperature
setting.
Select the programme and start
it
Turn the programme selector dial clockwise to the
required wash programme and press the start/stop
button
: the operating pilot light comes on and the
machine starts to operate.
At the end of the programme
The machine stops automatically, the operating pilot
light goes out.
If you have selected a gentle programme with the
anticrease option
, drain the water before opening
the door.
It is normal to have to wait for about 2 minutes before
being able to open the door to allow the safety lock to
release.
Press the start/stop button
.
Remove the laundry.
Operating sequence
P0961
P0960
P0917
B
P0033
P0880
95
°
Turn the drum by hand to make sure it is completely
empty, so as to avoid any forgotten items being
damaged in a subsequent wash (e.g. shrinking) or
their colour running into a load of whites.
Release any buttons which have been pressed.
Turn the water tap off and unplug the machine.
Leave the door ajar to air the machine.