Electrolux EW2F3047R5, Руководство пользователя

Страница: 22 / 36

• The door locks, the display shows
the indicator .
• When the countdown is
completed, the programme starts
automatically.
You can cancel or change
the set of the delay start
before you press the
. To
cancel the delay start:
• Press to set the
appliance to pause.
• Press until the
display shows '.
• Press again to
start the programme
immediately.
12.7 The AutoSense System
load detection
The AutoSense System adjusts the
programme duration to the load to
achieve perfect washing results in the
minimum possible time. After touching
the Start/Pause
button new cycle
duration will be displayed after 10-15
min.
The AutoSense System is
not available with all
programmes such as :Wool/
Silk, Rinse, SpinDrain, and
programmes with short
cycles.
12.8 Interrupting a programme
and changing the options
You can change only some options
before they operate.
1. Press .
The indicator flashes.
2. Change the options.
3. Press
again.
The programme continues.
12.9 Cancelling a running
programme
1. Turn the programme knob to position
to cancel the programme and to
deactivate the appliance.
2. Turn the programme knob again to
activate the appliance. Now, you can
set a new washing programme.
Before starting the new
programme the appliance
could drain the water. In this
case, make sure that the
detergent is still in the
detergent compartment, if
not fill the detergent again.
12.10 Opening the door when
the delay start operates
While a delay start operates, the
appliance door is locked and the
indicator
is on.
1. Press to pause the appliance.
2. Wait until the door lock indicator
goes off.
3. You can open the door.
4. Close the door and press the
again.
The delay start continues to operate.
12.11 Opening the door when
the programme operates
While a programme operates, the
appliance door is locked and the
indicator
is on.
CAUTION!
If the temperature and level
of the water in the drum are
too high, you cannot open
the door.
1. Turn the programme knob to position
to deactivate the appliance.
2. Wait for some minutes and then open
the appliance door.
3. Close the appliance door.
4. Set the programme again.
www.electrolux.com 22