64
installation
Underbench oven
Your underbench oven looks best when the control panel
is directly under the benchtop. An upper infill panel may
be added if the cooktop placed above the benchtop is too
deep. Refer to cooktop installation instructions for required
clearance between cooktop and oven.
IMPORTANT!
Note: Dimension’D’*
A requirement for all EVEPxxxx pyrolytic clean ovens and
Duo ovens – for proper ventilation there must be a gap
at the bottom rear of the cabinet. This can be a full width
opening 20mm deep.
Power point connection for the EVEP615 and EVEP618
must be accessible with the appliance fully installed. If
the supply cord is damaged it must be replaced by the
manufacturer, its service agent or similarly qualified persons
in order to avoid a hazard.
Cut-out dimensions
type of fit
A (width)
B (height)
C (depth)
Flush fit (mm)
600
600
581 min.
Proud fit (mm)
568
590
560 min.
Double oven Cut-out dimensions
type of fit
A (width)
B (height)
C (depth)
Flush fit (mm)
600
1086
581 min.
Proud fit (mm)
568
1078
560 min.
INSTALLATION OF THE APPLIANCE
Pyrolytic underbench cut-out dimensions
type of fit
A (width) B (height) C (depth)
D*
Flush fit (mm)
600
600
581 min.
20
Duo oven cut-out dimensions
type of fit
A (width) B (height) C (depth)
D*
Flush fit (mm)
600
893
581 min.
20
596mm
561mm
561mm
561mm
mounting
holes 582mm
mounting holes
582mm
fit long screws
provided
mounting holes
fit countersunk screws
with plastic spacers
provided
mounting
holes 582mm
596mm
650mm
min.
D
561mm
650mm
min.
596mm
mounting
holes 582mm
mounting
holes 582mm
Содержание EVE611
Страница 66: ...66 spare ...