Electrolux EUC1WS, Инструкция по установке и эксплуатации

Страница: 17 / 32

17
F F IIN NS ST TA AL LL LA AT TIIO ON N A AN ND D A AS SS SE EM MB BL LY Y
F F..1 1 IIn nttrro od du uccttiio on n
To ensure correct operation of the appliance and maintain
safe conditions during use, carefully follow the instructions
given below in this section.
W WA AR RN NIIN NG G
The above operations must
be carried out by the
specialised technician in
conformity with the current
safety regulations, regarding
the equipment used and the
operating procedures.
Before moving the appliance
make sure the capacity of
the lifting equipment used is
suitable for its weight.
F F..2 2 C Cu usstto om me err rre essp po on nssiib biilliittiie ess
The Customer must provide for the following:
• installation of an adequate electrical power supply ahead
of the appliance, according to the equipment’s technical
specifications (D.1
Main technical characteristics and D.2
Characteristics of power supply);
• the equipotential connection of the workplace electrical
system to the metal structure of the machine by means of a
copper cable of adequate section (see position “EQ“ in
Installation diagram);
• adducting for the electrical connection between the
workplace electric panel and the equipment;
• the water supply and drain connections and other
connections as indicated in D.1 Main technical
characteristics and in the paragraph F.6 Plumbing
connections.
F F..3 3 C Ch ha arra acctte erriissttiiccss o off tth he e iin nsstta alllla attiio on n p plla acce e
The machine is designed for installation in professional and
not domestic-type kitchens. Water collection traps/ metal
grates must be arranged in the floor at the machine
discharges
(see the Installation diagram), possibly
replaceable with a single water trap sized for a flow rate of at
least 3 l/s.
C CA AU UT TIIO ON N
Do not install the appliance over 2000
meters above sea level.
F F..4 4 P Po ossiittiio on niin ng g
The machine must be taken to the place of installation and
the packing base removed only when being installed.
Arranging the machine:
• Wear protective gloves and unpack the machine.
• Lift the equipment with a lift truck, remove the base and
position it the place of use.
• Carefully remove the protective film from the outer panels
without tearing it, to avoid leaving traces of glue.
• Adjust the equipment by turning the special adjustable feet
and making sure it is perfectly level, both length wise and
crosswise.