Electrolux ETG7256GKR, Руководство пользователя, Страница: 3 / 36

SAFE INSTRUCTIONS
Do not use gas other than that which is specified on the label
attached.
Do not place anything (e.g. flame tamer or asbestos mat) between the
pan and pan support, as serious damage to the appliance may result.
Do not remove the pan support and enclose the burner with a wok
stand, as this will concentrate and deflect the heat onto the hotplate.
Do not use large pots or heavy weights that can bend the pan support
or deflect flame onto the hotplate
Locate pan centrally over the burner so that it is stable and does not
overhang the appliance
Use only a wok support supplied or recommended by the
manufacturer of the appliance
The unit to be used for cooking only. Do not dry towels, clothes, etc.,
over it. If this is done, there is danger of fire
If a gas leak is found, close stopcock, open up all windows and call
your dealer. Do refrain from turning an electric switch on or off,
lighting a match, smoking or using a lighter.
Use the appliance in a well-ventilated room.
Do not use vinyl gas hose. It is liable to be softened by heat.
Use only a rubber hose.
Be sure to turn off the ignition knob and regulator of the cylinder after
use.
Avoid touching the burner, pan stand etc., immediately after use.
Otherwise you will get burnt.
Ensure that the rubber hose does not touch any part of the unit or lies
underneath it.
Connect the rubber hose to the gas inlet and fasten it with a hose
clamp.
prior to installation, ensure that the local distribution conditions (nature of the gas and gas pressure)
and the adjustment of the appliance are compatible.
the adjustment conditions for this appliance are stated on the label
this appliance is not connected to a combustion products evacuation device. It shall be installed and
connected in accordance with current installation regulations. Particular attention shall be given to the
relevant requirements regarding ventilation
CAUTION
In the event of the burner flames being accidentally extinguished, turn off the burner control knob and do
not attempt to re-ignite the burner for at least 1 minute.
In case of hotplate glass breakage:
-shut immediately off all burners and any electrical heating element and isolate the appliance from the
power supply.
-do not touch the appliance surface,
-do not use the appliance.