Electrolux ESL2400RO, Руководство пользователя

Страница: 17 / 60

A
B
C
A. Handle
B. Bracket, screws 4*12
C. Hinge, screws 4.2*16
2. Fix the panel onto the door with
screws.
A
B
A. Screw 4*12
B. Screw 4.2*16
10.2 Assembly
Make sure to position the
appliance with minimum
space of 50mm on both
sides of fully open door.
Keep 5 mm distance between both sides
of the appliance and the cabinet. There
are two possibilities for the cabinet hole
for the appliance.
min.
550 mm
min.
443mm
100
80
min.
555mm
1
Power cord, drain hose and water
supply line hole. To facilitate a proper
installation, position the hole to the
right or the the left of the appliance.
10.3 Tension adjustment of the
door spring
CAUTION!
To adjust the door spring call
an Authorised Service
Centre.
The door springs are set at the factory to
the proper tension for the outer door. If
you install aesthetic panel, adjust the
door spring tension. To strain or relax the
steel cable, rotate the adjusting screws.
Door spring tension is
correct when the door
remains horizontal in the
fully open position, yet, you
can close them with a slight
move of a finger .
10.4 Electrical connection
WARNING!
Do not use an extension
cord or and adapter plug
with this appliance.
WARNING!
Do not cut or remove the
earthing.
ENGLISH 17