Electrolux ESL 4200LO, Руководство пользователя

Страница: 9 / 16

6.4 Filling the rinse aid dispenser
M AX
1
2
3
4
+ -
A B
D
C
E
1. Press the release button ( D ) to open
the lid ( C ).
2. Fill the rinse aid dispenser ( A ), no
more than the mark 'max'.
3. Remove the spilled rinse aid with an
absorbent cloth to prevent too much
foam.
4. Close the lid. Make sure that the re-
lease button locks into position.
Fill the rinse aid dispenser when
the lens (
E ) is clear.
You can turn the selector of the
released quantity (
B ) between po-
sition 1 (lowest quantity) and posi-
tion 4 (highest quantity).
7. DAILY USE
1. Open the water tap.
2. Press the on/off button to activate the
appliance.
• If the salt indicator is on, fill the salt
container.
3. Load the baskets.
4. Add the detergent.
5. Set and start the correct programme
for the type of load and the degree of
soil.
7.1 Using the detergent
20
30
M AX
1
2
3
4
+
-
A B
C
1. Press the release button ( B ) to open
the lid ( C ).
2. Put the detergent in the compartment
(
A ) .
3. If the programme has a prewash
phase, put a small quantity of deter-
gent on the inner part of the appli-
ance door.
4. If you use detergent tablets, put the
tablet in the compartment (
A ).
5. Close the lid. Make sure that the re-
lease button locks into position.
7.2 Using the combi detergent
tablets
When you use tablets, that contain salt
and rinse aid, do not fill the salt container
and the rinse aid dispenser.
1. Adjust the water softener to the lowest
level.
2. Set the rinse aid dispenser to the low-
est position.
ENGLISH 9