Electrolux ESL 4200LO, Руководство пользователя

Страница: 10 / 16

If you stop to use the combi
detergent tablets, before you
start to use separately
detergent, rinse aid and
dishwasher salt, do these steps:
1. Press the on/off button to activate the
appliance.
2. Set the water softener to the highest
level.
3. Make sure that the salt container and
the rinse aid dispenser are full.
4.
Start the shortest programme with a
rinsing phase, without detergent and
without dishes.
5. Adjust the water softener to the water
hardness in your area.
6. Adjust the released quantity of rinse
aid.
7.3 Setting and starting a
programme
Reset function
For some settings it is necessary that the
appliance is in user mode.
The appliance is in user mode when all
the programme indicators are on and the
end indicator is flashing.
To set the appliance in user mode, do the
Reset function.
1. Press and hold Program until all the
programme indicators come on and
the end indicator flashes.
Starting a programme
1. Open the water tap.
2. Press the on/off button to activate the
appliance.
3. Press Program again and again until
only the indicator of the programme
you want to set is on.
4. Close the appliance door. The pro-
gramme starts.
Opening the door while the
appliance operates
If you open the door, the appliance stops.
When you close the door, the appliance
continues from the point of interruption.
Cancelling the programme
Do the Reset function.
Make sure that there is detergent
in the detergent dispenser before
you start a new programme.
At the end of the programme
When the programme is completed, the
end indicator is on.
1. Press the on/off button to deactivate
the appliance.
2. Close the water tap.
Important
• Let the dishes become cold before you
remove them from the appliance. Hot
dishes can be easily damaged.
• First remove the items from the lower
basket, then from the upper basket.
• There can be water on the sides and on
the door of the appliance. Stainless
steel becomes cool more quickly than
the dishes.
8. HINTS AND TIPS
8.1 The water softener
Hard water contains a high quantity of
minerals that can cause damage to the
appliance and bad washing results. The
water softener neutralises these minerals.
The dishwasher salt keeps the water soft-
ener clean and in good conditions. It is
important to set the right level of the water
softener. This makes sure that the water
softener uses the correct quantity of dish-
washer salt and water.
10 www.electrolux.com