background image

In this fully integrated appliance the controls are located on the
top of the door. When selecting a programme, the door needs
to be slightly open.

1. Check that the baskets have been 

loaded correctly and that the spray 
arms can rotate freely  

2. Turn on the water tap

3. Press the On/Off push button

The programme selection push button indicator light 
illuminates and in the digital display are visible 2 horizontal 
lines (--) (setting mode).

4. Setting and starting the programme 

a) To select a programme, press the programme selection 

push button until the number of the desired programme 
appears in the digital display (see "Washing 
programmes" chart for the number of the programme).

b) To select the delay start of the programme, press 

the "delay start" option push button until the number of 
the hours selected for the delay start, followed by the 
letter h, will appear in the digital display (e.g. 1 h).

The start of the programme or of the countdown for the 
delay start will occur only after the closure of the door, until 
that moment you can modify the selection made.

Close the dishwasher door.

a) If delay start has not been set, the programme will 

start automatically.

b) If delay start has been set, the countdown starts 

automatically and will decrease with steps of 1 hour.
The opening of the door will not modify or interrupt the 
countdown. Once the delay start has elapsed the 
programme will start automatically.

Once the washing programme has started, a point-shaped 
optical signal appears on the floor beneath the 
dishwasher’s door. This optical signal will remain 
illuminated for all the duration of the washing programme. 
If the appliance has been installed higher up with a 
furniture door mounted flush, the optical signal will be no 
longer visible.

5. To interrupt or cancel a washing 

programme in progress

Interrupt or cancel a washing programme in progress 
ONLY if it’s absolutely necessary

Attention! Hot steam may escape when the door is 
opened. Open the door carefully.

To interrupt a washing programme in 
progress

Open the dishwasher door; the programme will stop. 
Close the door; the programme will start from the point in 
which it was interrupted.

To cancel a washing programme in progress

Open the dishwasher door. 
Press for about 3 seconds the Cancel push button. The 
indicator light of the programme selection push button will 
illuminate and in the digital display will appear 2 horizontal 
lines (--), indicating that the running programme has been 
cancelled and that the machine has returned to setting 
mode.
It is now possible to select and start a new washing 
programme. 

(If a new washing programme will be selected, check that 
there is detergent in the detergent dispenser).

6. To cancel a delay start in progress

Open the dishwasher door. 
Press for about 3 seconds the Cancel push button. The 
indicator light of the programme selection push button will 
illuminate and in the digital display will appear 2 horizontal 
lines (--), indicating that the running programme has been 
cancelled and that the machine has returned to setting 
mode.
With the cancelling of the delay start also the set 
programme will be cancelled.

Select the washing programme again.

7. End of the washing programme

The dishwasher will automatically stop and an audible 
signal informs you of the end of the washing programme.

When the washing programme has ended, the optical 
signal on the floor beneath the dishwasher’s door will turn 
off. Open the dishwasher door only when this optical 
signal turns off.

If the door is not immediately opened at the end of the 
programme, air will circulate inside the dishwasher to 
prevent residual steam recondensing on the dishes as 
water droplets.
This device operates intermittently for about 20 
minutes, as long as the dishwasher is switched on.
If the On/Off push button is pressed or the door is opened 
during these 20 minutes, the device will be automatically 
cancelled.

Hot steam may escape from the appliance when opening 
the door immediately after the end of the programme, 
therefore, open the door carefully.

Switch off the dishwasher by pressing the On/Off push 
button.

Starting a washing programme

16

Содержание ESL 4131

























Отзывы: