Electrolux ESF65054, Руководство пользователя

Страница: 24 / 88

If you use the combi detergent tablets
('3 in 1', '4 in 1', '5 in 1'), use the multi- tab function (refer to 'Multitab func-
tion').
SETTING THE WATER SOFTENER
The water softener removes minerals and
salts from the water supply. These minerals
and salts can cause damage to the appli-
ance. Adjust the level of the water softener if this
does not agree with the water hardness in
your area.
Contact your local water authority to know
the water hardness in your area.
Water hardness
Water hardness ad-
justment
German degrees
(°dH)
French degrees
(TH°)
mmol/l Clarke de-
grees
manually elec-
troni-
cally
51 - 70 91 - 125 9,1 - 12,5 64 - 88
2
1) 10
43 - 50 76 - 90 7,6 - 9,0 53 - 63
2
1) 9
37 - 42 65 - 75 6,5 - 7,5 46 - 52
2
1) 8
29 - 36 51 - 64 5,1 - 6,4 36 - 45
2
1) 7
23 - 28 40 - 50 4,0 - 5,0 28 - 35
2
1) 6
19 - 22 33 - 39 3,3 - 3,9 23 - 27
2
1)
5
1)
15 - 18 26 - 32 2,6 - 3,2 18 - 22 1 4
11 - 14 19 - 25 1,9 - 2,5 13 - 17 1 3
4 - 10 7 - 18 0,7 - 1,8 5 - 12 1 2
< 4 < 7 < 0,7 < 5
1
2)
1
2)
1) Factory position.
2) Do not use salt at this level.
You must adjust the water softener
manually and electronically.
MANUAL ADJUSTMENT
Turn the water hardness dial to the position
1 or 2 (refer to the table).
ELECTRONIC ADJUSTMENT
1. Switch off the appliance
2. Press and hold the start/cancel button.
3. Turn the programme knob counter-
clockwise until the programme marker
agrees with the first available washing
programme on the control panel.
4. Release the start/cancel button when
the display shows the current adjust-
ment.
Example: the display shows
= level
5.
5. Press the start/cancel button to change
the adjustment. Each time you press
the start/cancel button, the adjustment
goes to the subsequent level.
6. Turn the programme knob to the off
position to keep the operation.
If the water softener is set electronically
to the level 1, the salt indicator light
stays off.
24 electrolux