• The program duration starts to de-
crease with steps of 1 minute.
Starting a program with delay
start
1.
Set the program.
2.
Press
Delay
again and again until the
display shows the delay time you want
to set (from 1 to 24 hours). The Delay
indicator comes on. The program indi-
cator, the program bar and the option
indicators are no longer visible.
3.
Press
Start
to start the countdown.
• If you want to see which program
and options are set, press any
touchpad (not Reset). The set pro-
gram and options are visible for a
few seconds.
When the countdown is completed, the
program starts.
Opening the door while the
appliance operates
If you open the door, the appliance stops.
When you close the door, the appliance
continues from the point of interruption.
Cancelling the delay start while
the countdown operates
When you cancel the delay start you have
to set the program and options again.
1.
Press
Reset
. The indicator and the
duration of the program ECO come
on.
Cancelling the program
1.
Press
Reset
. The indicator and the
duration of the program ECO come
on.
Make sure that there is detergent
in the detergent dispenser before
you start a new program.
At the end of the program
The display shows 0:00.
• The program indicator goes off.
• All the segments of the program bar are
on with fixed light.
1.
Press the on/off button or wait for the
Auto Off function to automatically de-
activate the appliance.
2.
Close the water tap.
Important
• For better drying results, keep the door
ajar for some minutes before you re-
move the dishes.
• Let the dishes become cold before you
remove them from the appliance. Hot
dishes can be easily damaged.
• First remove the items from the lower
basket, then from the upper basket.
• There can be water on the sides and on
the door of the appliance. Stainless
steel becomes cool more quickly than
the dishes.
8.
HINTS AND TIPS
8.1
The water softener
Hard water contains a high quantity of
minerals that can cause damage to the
appliance and bad washing results. The
water softener neutralises these minerals.
The dishwasher salt keeps the water soft-
ener clean and in good conditions. It is
important to set the right level of the water
softener. This makes sure that the water
softener uses the correct quantity of dish-
washer salt and water.
8.2
Using salt, rinse aid and
detergent
• Only use salt, rinse aid and detergent
for dishwasher. Other products can
cause damage to the appliance.
• The rinse aid helps, during the last rins-
ing phase, to dry the dishes without
streaks and stains.
• Multi-tablets contain detergent, rinse
aid and other added agents. Be sure
that these tablets are applicable to the
14 www.electrolux.com
