Electrolux ESF 66860, Руководство пользователя

Страница: 13 / 20

Malfunction Fault code Possible cause Possible solution
The appliance does not
fill with water. The display shows The water tap is
blocked or is furred with
limescale. Clean the water tap.
The water pressure is
too low. Contact your local wa-
ter authority.
The water tap is closed. Open the water tap.
The filter in the water in-
let hose is blocked. Clean the filter.
The connection of the
water inlet hose is not
correct. Make sure that the con-
nection is correct.
The water inlet hose is
damaged. Make sure that the wa-
ter inlet hose has no
damages.
The appliance does not
drain the water. The display shows There is a blockage in
the sink spigot. Clean the sink spigot.
The connection of the
water drain hose is not
correct. Make sure that the con-
nection is correct.
The water drain hose is
damaged. Make sure that the wa-
ter drain hose has no
damages.
The anti-flood device
operates. The display shows Close the water tap and
contact the service
centre.
The programme does
not start. The appliance door is
open. Close the door correct-
ly.
The mains plug is not
connected in. Put in the mains plug.
Blow out fuse in the
household fuse box. Replace the fuse.
The delay start is set. If you want to cancel
the delay start, refer to
'Select and start a
washing programme'.
After the check, switch on the appliance. The
programme continues from the point of in-
terruption.
If the malfunction shows again, contact the
service centre.
If the display shows other fault codes, con-
tact the service centre.
The necessary data for the service centre is
on the rating plate. We recommend that you write the data here:
Model (MOD.) ....................
Product number (PNC) ....................
Serial number (S.N.) ....................
electrolux 13