Electrolux ESF 66860, Руководство пользователя

Страница: 12 / 20

The pressure and temperature of the
water, the variations of power supply and the quantity of dishes can change
these values.
Care and cleaning
To remove and clean the filters
Dirty filters decrease the washing results. Al-
though the maintenance is very low with
these filters, we recommend that you make
a check at intervals and if necessary, clean
them.
1. To remove filter (A), turn it counterclock-
wise and remove it out from filter (B).
A
B
2. Filter (A) has 2 parts. To disassemble the
filter, pull them apart.
3. Fully clean the parts under running water.
4. Put the 2 parts of the filter (A) together
and push. Make sure that they assemble
correctly in each other.
5. Remove the filter (B).
6. Fully clean the filter (B) under running wa-
ter.
7. Put the filter (B) to its initial position. Make
sure that it assembles correctly under the
two guides (C).
C
8. Put the filter (A) into position in filter (B)
and turn it clockwise until it locks.
To clean the spray arms
Do not remove the spray arms.
If the holes in the spray arms become clog-
ged, remove remaining parts of soil with a
cocktail stick.
To clean the external surfaces
Clean the external surfaces of the appliance
and control panel with a damp soft cloth.
Only use neutral detergents. Do not use
abrasive products, scouring pads or solvents
(e.g. acetone).
What to do if…
The appliance does not start or stops during
operation. First try to find a solution to the problem (refer
to the chart). If not, contact the service cen-
tre.
12 electrolux