24
What to do if...
Remedying small malfunc-
tions
If one of the following fault codes is displayed in the
multi-display during operation:
–
Fault code
Å 10
(Problems with water inlet),
–
Fault code
Å 20
(Problems with water drainage),
please have a look at the following table.
When the fault is remedied, press the button for the
cycle that has started. The cycle will continue.
With other fault codes (“
Å
” followed by a number):
–
Abort the dishwashing cycle.
–
Switch the appliance off and on again.
–
Re-set the dishwashing cycle.
If the fault is displayed again, please contact the
Customer Care Department and inform them of the
fault code.
Malfunction
Possible cause
Remedy
The cycle indicator for the select-
ed dishwashing cycle is flashing:
fault code
Å 10
is displayed in the
multi-display:
(Problems with water inlet)
Water tap is blocked with limescale
or faulty.
Check the water tap and have it re-
paired if necessary.
The tap is turned off.
Turn the tap on.
The filter (where present) in the
threaded hose fitting on the tap is
blocked.
Clean the filter in the threaded hose
fitting.
Filters in the base of the dishwash-
er compartment are blocked.
Cancel the dishwashing cycle (see
chapter: Starting a dishwashing cy-
cle),
clean filters (see chapter: Cleaning
the filters),
then start the dishwashing cycle
again.
Water inlet hose
has not been correctly positioned.
Check the position of the hose.
The cycle indicator for the select-
ed dishwashing cycle is flashing,
fault code
Å 20
is displayed in the
multi-display.
(Problems with water drainage)
The sink outlet is blocked.
Clean out sink outlet.
Water drain hose
has not been correctly positioned.
Check the position of the hose.
Fault code
Å 30
is displayed in the
multi-display.
The anti-flood system has been
triggered.
First shut off the water tap, then
switch off the appliance and contact
the Customer Care Department.
The cycle is not starting.
The mains plug is not
plugged in.
Plug in mains plug.
A fuse in the house’s wiring system
is defective.
Replace fuse.
For dishwasher models with a delay
start timer:
A start time has been selected.
If the dishes are to be washed im-
mediately, cancel the delay start.