20
Starting a dishwashing
cycle
1.
Check that the spray arms can turn freely.
2.
Turn the water tap on fully.
3.
Close the door.
4.
Press the ON/OFF button.
5.
Select the desired cycle.
The programme indicator comes on. The remaining
time expected for the cycle will be shown in the
multi-display.
The selected cycle will begin after approximately 3
seconds.
3
During the dishwashing cycle, the remaining
time shown in the multi-display may be adjust-
ed according to the size of the load, degree of
soiling, etc.
Interrupting or aborting a dish-
washing cycle
Only interrupt a dishwashing cycle that is in progress
if it is absolutely necessary.
Interrupting the dishwashing pro-
gramme by opening the dishwasher door
1
Hot steam may escape when the door is
opened. There is a risk of scalding.
1.
Open the door carefully. The dishwashing cycle will
stop.
2.
Close the door. The cycle will continue.
Aborting the dishwashing cycle
1.
Press function buttons
2
and
3
and keep them
pressed.
The programme display for the current cycle will
flash for several seconds and then go out.
2.
Release the function buttons. The dishwashing cy-
cle has been cancelled.
3.
If you want to start a new cycle, check whether
there is any detergent in the dispenser.
3
Turning off the dishwasher will only interrupt a
selected dishwashing cycle, not cancel it. The
cycle will recommence after turning the dish-
washer back on again.
Setting the Delay Timer
3
With the delay timer you can delay the start of
a dishwashing cycle for between 1 and 19
hours.
1.
Press the Delay Timer button repeatedly until the
multi-display shows the desired time delay, for ex-
ample
12h
, if the cycle is to start in 12 hours. The
Delay Timer indicator is illuminated.
2.
Select dishwashing cycle.
3.
The time remaining to the start of the cycle is con-
tinuously displayed (e. g.
12h
,
11h
,
10h
, …
1h
etc.).
To change the time delay:
As long as the cycle has not yet started, you can still
change the setting by pressing the DELAY TIMER
button.
Cancelling the time delay:
Press the Delay Timer button repeatedly until the
length of the selected cycle appears in the multi-dis-
play. The selected dishwashing cycle will begin im-
mediately.
To change a dishwashing cycle
As long as the cycle has not yet started, you can still
change the dishwashing cycle. First abort the dish-
washing cycle, then re-set the time delay, lastly se-
lect the new dishwashing cycle.
Switching off the dish-
washer
Do not switch off the dishwasher until the multi-dis-
play indicates “0” for the remaining cycle time.
1.
Press the ON/OFF button. All display indicators will
go out.
2.
Turn off the water tap.
1
Carefully open the door. Hot steam may es-
cape.
•
Hot dishes are sensitive to knocks. Therefore leave
the dishes to cool for about 15 minutes before re-
moving them. You also get a better drying result.
•
Dishes dry more quickly if you open the door for a
moment after the cycle has ended and then leave it
slightly open.
Removing the dishes
3
It is normal for the inner door and the dispens-
ers to be damp.
•
Empty the lower basket first, then the upper bas-
ket. This way you avoid dripping water from the
upper basket onto dishes in the lower basket.
