Electrolux ERT13300WK, Руководство пользователя

Страница: 8 / 60

8
electrolux
If the appliance is not functioning properly,
check that:
• the plug is firmly in the wall socket and the
mains power switch is on;
• there is an electricity supply (find out by
plugging in another appliance);
• If there are water drops on the bottom of the
cabinet, check that the defrost water drain
opening is not obstructed (see “Defrosting”
section).
• If your appliance is still not working properly
after making the above checks, contact the
nearest service centre.
• If the power cable is damaged, it must be
replaced with a special cable or assembly
available from the manufacture or the
technical assistance service.
To obtain fast service, it is essential that
when you apply for it you specify the model
and serial number of your appliance which
can be found on the guarantee certificate
or on the rating plate located inside the
appliance, on the bottom left-hand side.
CUSTOMER SERVICE AND SPARE PARTS
ELECTRICAL CONNECTION
Before plugging in, ensure that the voltage and
frequency shown on the serial number plate
correspond to your domestic power supply.
Voltage can vary by ±6% of the rated voltage. For
operation with different voltages, a suitably sized
auto-transformer must be used.
The appliance must be earthed
The power supply cable plug is provided with
a contact for this purpose. If the domestic
power supply socket is not earthed, connect
the appliance to a separate earth in compliance
with current regulations, consulting a specialist
technician.
The Manufacturer declines all responsibility
if the above safety precautions are not
observed.
This appliance complies with the
E.E.C. Directives.
INSTALLATION
Important
In order to reserve the required space around the
refrigerator for ventilation, please keep 100mm
distance between 2 sides and top of the wine
refrigerator and the wall and 50mm distance
between rear of refrigerator and the wall.