Problem
Possible cause
Solution
Water flows on the
ground.
The melting water outlet
does not flow in the evapo-
rative tray above the com-
pressor.
Attach the melting water
outlet to the evaporative
tray.
The temperature in
the appliance is too
low.
The temperature regulator
is not set correctly.
Set a higher temperature.
The temperature in
the appliance is too
high.
The temperature regulator
is not set correctly.
Set a lower temperature.
The door is not closed cor-
rectly.
Refer to "Closing the door".
The product temperature is
too high.
Let the product temperature
decrease to room tempera-
ture before storage.
Many products are stored
at the same time.
Store less products at the
same time.
The temperature in
the refrigerator is too
high.
There is no cold air circula-
tion in the appliance.
Make sure that there is cold
air circulation in the appli-
ance.
The temperature in
the freezer is too
high.
Products are too near to
each other.
Store products so that there
is cold air circulation.
There is too much
frost.
Food is not wrapped cor-
rectly.
Wrap the food correctly.
The door is not closed cor-
rectly.
Refer to "Closing the door".
REPLACING THE LAMP
1
2
1.
Switch off the appliance.
2.
Press on the rear hook and at the
same time slide the cover in the direc-
tion of the arrow.
3.
Replace the lamp with one of the same
power and specifically designed for
household appliances. (the maximum
power is shown on the lamp cover).
4.
Slide the lamp cover into its original
position.
5.
Switch on the appliance.
6.
Open the door. Make sure that the
light comes on.
CLOSING THE DOOR
1.
Clean the door gaskets.
38 www.electrolux.com
Содержание ERN29801
Страница 79: ...DEUTSCH 79 ...
Страница 80: ...www electrolux com shop 222359911 A 042012 ...