Problem
Possible cause
Solution
Upper or lower
square is shown in
the temperature dis-
play.
An error has occurred in
measuring the tempera-
ture
Call your service represen-
tative (the cooling system
will continue to keep food
products cold, but temper-
ature adjustment will not be
possible)
The compressor
runs continuously.
The Temperature regulator
may be set incorrectly.
Set a warmer temperature.
The door is not closed
correctly.
Refer to "Closing the door".
The door has been
opened too frequently.
Do not keep the door open
longer than necessary.
The food temperature is
too high.
Let the food temperature
decrease to room tempera-
ture before storage.
The room temperature is
too high.
Decrease the room temper-
ature.
Water flows inside
the refrigerator.
The water outlet is clog-
ged.
Clean the water outlet.
Food prevent that water
flows into the water collec-
tor.
Make sure that food do not
touch the rear plate.
Water flows on the
ground.
The melting water outlet
does not flow in the evap-
orative tray above the
compressor.
Attach the melting water
outlet to the evaporative
tray.
The temperature in
the appliance is too
cold.
The Temperature regulator
may be set incorrectly.
Set a warmer temperature.
The temperature in
the appliance is too
warm.
The Temperature regulator
may be set incorrectly.
Set a lower temperature.
The door is not closed
correctly.
Refer to "Closing the door".
The food temperature is
too high.
Let the food temperature
decrease to room tempera-
ture before storage.
The temperature in
the refrigerator is
too warm.
There is no cold air circu-
lation in the appliance.
Make sure that there is cold
air circulation in the appli-
ance.
Large quantities of food to
be cooled were put in at
the same time.
Insert smaller quantities of
food to be cooled at the
same time.
The appliance does
not operate.
The appliance is switched
off.
Switch on the appliance.
12 www.electrolux.com
