Electrolux ERC925SA, Руководство пользователя

Страница: 9 / 16

9
COOKER HOOD INSTALLATION (CONTINUED)
Fig. 16
9. installation of telescopic flue covers
Separate the inner and outer flue covers. Carefully
reassemble the upper and lower flue covers sections by
sliding the inner into the outer flue cover. Carefully lower
the assembled upper and lower flue covers onto the top
of the cooker hood body, and insert the flue cover into
the cooker hood body approximately 5mm. Fix upper flue
cover to the wall mounting bracket with screws supplied.
Ensure that the upper section is extended.
NOTE: Carefully remove the plastic protective coating,
if present, from the flue covers. Pay particular attention
when removing protective plastic coating from decals.
iMPOrTanT!
Care must be taken to ensure the screws (supplied in
accessories bag) are not cross threaded when attaching
the upper flue cover. If installed in recirculating mode,
insert the optional carbon filter (included in recirculation
kit AR928RK). To complete the cooker hood installation,
insert the three filters to the underside of the hood body.
Place back edge of filter into position and push up front
edge so that the filter clips into place.
Your Electrolux cooker hood is now ready to use.
Fig. 17
Fig. 18