Electrolux ERC925DSD, Руководство пользователя

Страница: 11 / 44

11
INSTALLATION
The hood has been designed to be installed and
used either as a “
Exhausted mode ”, or as a
“ Recirculation mode ”.
Exhausted mode
Cooking steam is sucked and channelled outside the
house through a discharge duct (not supplied), fitted
to the hood steam outlet.
Ensure that the discharge duct is correctly fitted to the
air outlet, unit using an appropriate connection system.
NOTE: It is not recommended to have a carbon filter
fitted when operating in exhausted mode
Recirculation mode
The air is filtered through one or more the charcoal
filters, and then resent into room.
IMPORTANT
Ensure appropriate air circulation around
the hood.
IMPORTANT
If the hood is supplied without charcoal filters and
installed on recirculation mode, these must be fitted
before the hood can be used. Filters are available
in shops. The hood should be installed away from
particularly dirty areas, windows, doors and heat
sources. The accessories for wall fixing are not
included because wall made of different materials
require different types of fixing accessories. Use fixing
systems suitable for the walls of your home and the
weight of the appliance. For more details, contact
a specialised dealer. Keep this booklet for
future consultation.
WARNING
Fixing devices for the wall are not included
since different wall materials require different
types of fixing devices. Use fixing devices
suitable for the walls in your home and for the
weight of the appliance. For advice on suitable
fixing systems, contact your local
specialised dealer.
WARNING
Failure to install the screws or fixing device in
accordance with these instructions may result
in electrical hazards.
2-4
1x
1x
150 mm ø
1x
1x
C