6
Fresh food refrigeration
To obtain the best performance:
•
do not store warm food or evaporating liquids in
the refrigerator;
•
do cover or wrap the food, particularly if it has a
strong flavour.
•
Position food so that air can circulate freely round
it.
D338
Movable shelves
The walls of the refrigerator are equipped with a
series of runners so that the shelves can be
positioned as desired.
Fridge section
A. ON/OFF button
ON:
Press button (A). The temperature indicator
(B) will come on.
OFF:
Hold button (A) down till the temperature
indicator (B) goes out.
C - D. Temperature adjustment
buttons
The temperature can be set b2°C and +8°C.
When button (C) or (D) is pressed, the set temperature
appears flashing on the indicator (B). It is only possible to
modify the set temperature when the indicator is
flashing. To set a warmer temperature, press button (C),
to set a colder temperature, press button (D). The
indicator continues for a few seconds to display the
temperature just set, then it reverts to indicating the
temperature inside the section.
The programmed temperature will be reached within 24
hours.
Attention!
During the stabilisation period when the appliance is first
run, the temperature displayed may not correspond to
the temperature set. During this period, it is possible for
the temperature displayed to be lower than the set
temperature.
B. Temperature indicator
During normal operation, the average temperature of the
fridge section is displayed.
Attention!
A difference between the displayed temperature and the
set temperature is normal. In particular when:
- the set temperature has recently been modified
- the door has been open for a long time
- hot food has been put in the fridge.
E. Action Cool warning light
F. Action Cool function button
With the Supercooling function, the fridge is set to
maximum performance. This is recommended when
large quantities of food are introduced.
Press the Supercooling function button (F). The
Supercooling warning light (E) lights up. The internal
temperature goes down to +2°C.
After about 6 hours, the Supercooling function
deactivates automatically.
Startup and temperature
adjustment.
Insert the plug in the mains socket. Press button (A). The
fridge section is now running.
The fridge section is set to a temperature of +5°C. This
temperature will be reached in several hours.
As soon as the fridge section is switched on, the
indicator (B) displays the current temperature in the
fridge section.
11
Noise due to the adjustment of the unit’s structure
Possible noise sources that are
easy to eliminate:
The appliance is not well levelled:
Simply adjust the levelling foot.
The appliance touches adjacent units:
Move the units away
Interior accessories are not fixed securely:
Remove the accessories and put them back properly
Bottles and/or receptacles touch each other
inside the appliance:
Separate them.
Tic
Tic
Hereunder you will find some normal causes of noise
that do not jeopardise normal functioning of the
product.
Compressor motor noise
Noise caused by the gas circulating in the
refrigerating circuit pipes
Blubb
Blubb
Brrrr
Noisiness
CUSTOMER SERVICE AND SPARE PARTS
If the appliance is not functioning properly, check
that:
•
the plug is firmly in the wall socket and the mains
power switch is on;
•
there is an electricity supply (find out by plugging
in another appliance);
•
the thermostat knob is in the correct position.
•
If there are water drops on the bottom of the
cabinet, check that the defrost water drain
opening is not obstructed (see “Defrosting”
section).
•
If your appliance is still not working properly after
making the above checks, contact the nearest
service centre.
To obtain fast service, it is essential that when you
apply for it you specify the model and serial number
of your appliance which can be found on the
guarantee certificate or on the rating plate located
inside the appliance, on the bottom left-hand side.
