background image

43

Ice-cube production

This appliance is equipped with one or more trays for
the production of ice-cubes.
Fill these trays with water, then put them in the freezer
compartment.

Do not use metallic instruments to remove the trays
from the freezer.

Defrosting

Frost is automatically eliminated from the evaporator
of the refrigerator compartment every time the motor
compressor stops, during normal use.
The defrost water drains out through a trough into a
special container at the back of the appliance, over
the motor compressor, where it evaporates.

It is important to periodically clean the defrost
water drain hole in the middle of the refrigerator
compartment channel to prevent the water over-
flowing and dripping onto the food inside.
Use the special cleaner provided, which you will
find already inserted into the drain hole.

Fig. 8

D037

The freezer compartment, however, will become pro-
gressively covered with frost. This should be removed
with the special plastic scraper provided, whenever
the thickness of the frost exceeds 4 mm.
During this operation it is not necessary to switch off
the power supply or to remove the foodstuffs.

Never use sharp metal tools to scrape off frost
from the evaporator as you could damage it.

Do not use a mechanical device or any artificial means
to speed up the thawing process other than those rec-
ommended by the manufacturer.

However, when the ice becomes very thick on the in-
ner liner, complete defrosting should be carried out as
follows:

pull out the plug from the wall socket or turn the ther-
mostat knob to the «

ª

» setting;

remove any stored food, wrap it in several layers of
newspaper and put it in a cool place;

leave the door open, and insert the plastic scraper in
the appropriate seating at the bottom centre, placing
a basin underneath to collect the defrost water;

Fig. 9

when defrosting is completed, dry the interior thor-
oughly;

keep the scraper for future use;

turn the thermostat knob back to the required setting
or replace the plug in the power socket.
After two or three hours, reload the previously re-
moved food into the compartment.

Important: A temperature rise of the frozen food
packs, during defrosting, may shorten their safe stor-
age life.

D068

Содержание ER 2821 B










Отзывы: