Electrolux EOG2102, Руководство пользователя

Страница: 21 / 32

10.4 Removing the shelf
supports and removing the
catalytic panels
To clean the oven, remove the shelf
supports and remove the catalytic
panels.
CAUTION!
Be careful when you remove
the shelf supports. The
catalytic panels are not
attached to the oven walls
and can fall out when you
remove the shelf supports.
1. Pull the front of the shelf support
away from the side wall. Hold the
rear shelf runners and catalytic panel
in place with the other hand.
2. Pull the rear end of the shelf support
away from the side wall and remove
it.
2
1
Install the shelf supports in the opposite
sequence.
10.5 Catalytic cleaning
CAUTION!
Do not clean the catalytic
surface with oven sprays,
abrasive cleaning agents,
soap or other cleaning
agents. This will damage the
catalytic surface.
Spots or discolouration of
the catalytic surface have no
effect on catalytic properties.
WARNING!
Keep children away when
you clean the oven at a high
temperature. The oven
surface becomes very hot
and there is a risk of burns.
Before activating the
catalytic cleaning remove all
the accessories from the
oven.
The walls with a catalytic coating are
self-cleaning. They absorb fat which
collects on the walls while the appliance
operates.
To support the self-cleaning procedure,
heat the empty oven on a regular basis.
1. Clean the oven floor with warm water
and washing up liquid, then dry it.
2. Set the maximum temperature and
let oven operate for 1 hour.
3. When the appliance is cool, clean it
with a soft and moist sponge.
10.6 Cleaning the oven door
The oven door has two glass panels.
You can remove the oven door and the
internal glass panel to clean it.
The oven door can close if
you try to remove the
internal glass panel before
you remove the oven door.
CAUTION!
Do not use the appliance
without the internal glass
panel.
ENGLISH 21