Electrolux EOC65100, Руководство пользователя

Страница: 48 / 68

48 electrolux cleaning and care
Pyrolytic cleaning
Warning: The oven gets very hot
during this process. Keep small
children away.
Important: Before carrying out the
pyrolytic cleaning process, all re-
movable parts, including the side
rails, must be removed from the ov-
en.
If you use the oven shelf runners
that are available as special acces-
sories, these must be removed be-
fore pyrolytic cleaning.
If the side rails or oven shelf runners
are still in place, ‘C1’ appears in the
time display.
The pyroluxe process then cannot
be started due to a safety cut-out
that protects the side rails/oven
shelf runners.
Performing Pyroluxe
1. First remove the worst of the residue
manually.
2. Set the oven function dial to
Pyroluxe
.
– “ Pyr 1 ” appears in the display.
3. Press the Pyrolyse time button.
Pyrolytic cleaning then starts.
The Light does not work.
When a pre-set temperature is
reached, the door is locked.
The bars of the heat indicator light
up, until the door is unlocked again.
Changing the length of Pyroluxe
1. Proceed as described in the section
Performing Pyroluxe
2. As long as Cook time is flashing,
select the Pyroluxe period using the
buttonPyrolyse time
:
Button Pyrolyse time pressed
once
=
“ Pyr 1 ” or
Button Pyrolyse time pressed
twice = “ Pyr 2 ”.
Pyrolytic cleaning then starts.
If Cook time is no longer flash-
ing, press the Selection button
again and then perform the setting
procedure.
Changing the Pyroluxe switch-off
time
The Pyroluxe switch-off time can be
changed using the clock function End
time
(within 2 minutes of setting the
Pyroluxe).
When the different Pyroluxes are
set:
– “
Pyr 1
” - 3:15 = long Pyrolyse: for a
high degree of soiling,
– “ Pyr 2 ” - 2:15 = short Pyrolyse: for
a light degree of soiling.