![Electrolux ENL60710S Скачать руководство пользователя страница 70](http://html.mh-extra.com/html/electrolux/enl60710s/enl60710s_user-manual_93610070.webp)
70
electrolux
EN
Remove any substances in the fi lter
3.
Open the main tap water valve and
•
check if water comes out of the Water
Tube.
Check if the Water Valve is open in
•
case water does not come out.
Leave the valve open until clean water
•
is coming out.
Initial water may contain
–
some substances out of fi lter
(manufacturing process).
Attach the Filter Box
4.
Screw and fasten the fi lter holder
•
to the left/right side of the back of
refrigerator.
In case the holder is not fastened well,
–
remove the back paper of the tape on
the fi lter holder and attach it.
Insert the fi lter box into the holder.
•
Connect the Water Tube to the
5.
refrigerator
Remove the rear cover at the bottom
•
back of the refrigerator.
Insert the fastening ring into the
•
Water tube. (Be careful to follow the
direction of the nut.)
Insert the Water Tube into the top
•
of the Water Valve, turn the nut
clockwise to fasten it. (The Water
valve is to the right of the motors.)
Check for any bent tubes or water
•
leaks; if so, re-check installation
procedure.
Replace the rear cover. (The Water
•
Tube should be placed between the
groove of the refrigerator back and
motor cover.)
Set the tube upright as the fi gure
shows.
Water
Tube
Water Tube
Nut
Water Valve
Fasten the Water Tube
6.
Fasten the Water Tube with the
•
[Fastener A].
Check if the tube is bent or sqeezed.
•
If so, set it right to prevent any water
leak.
Fastener A
Water Tube
After installation of Water Supply System
7.
Plug in the refrigerator, press the
•
[WATER] button on the control panel
for 2~3 minutes to remove any air
(bubble) in the pipes and drain out the
initial water.
Check for the water leaks again
•
through the water supply system
(tubes, connectors and pipes).
Rearrange the tubes again and do not
move the refrigerator.
Water Tube
Connector
Tap
Downloaded from Fridge-Manual.com Manuals