Electrolux ENA34733X, Руководство пользователя

Страница: 11 / 36

m1
m2
m3
m4
m5
m6
8. Remove the spacer (m6) and move to the oth-
er side of the hinge pivot (m5).
9. Remove using a tool the cover (b1). Unscrew
the lower hinge pivot (b2) and the spacer (b3)
and place them on the opposite side.
10. Re-insert the cover (b1) on the opposite side.
b1
b2
b3
11. Remove the stoppers (d1) and move to the
other side of the doors.
12. Remove the left-hand cover pin of the middle
hinge (m3,m4) and move to the other side.
13. Fit the pin of the middle hinge (m5) into the left-
hand hole of the lower door.
14. Re-insert the lower door on the pivot pin (b2).
15. Re-screw the middle hinge (m1) on the oppo-
site side . Do not forget the plastic spacer
(m2) inserted under the middle hinge.
16. Re-insert the upper door on the middle hinge
(m5).
Make sure that the edges of the doors run
parallel to the side edge of the appliance.
17. Position and fix the upper hinge (you can find
them in the instruction for use bag) on the op-
posite side (t6).
t6
t7
18. Insert the panel (t7) (that can be found in the
instruction for use bag).
19. Open the upper door, attach the top cover
(t2) using screws (t1). Insert the magnet (d7).
Close the door.
20. Reposition, level the appliance, wait for at
least four hours and then connect it to the
power socket.
Do a final check to make sure that:
• All screws are tightened.
• The magnetic seal adheres to the cabinet.
• The door opens and closes correctly.
If the ambient temperature is cold (i.e. in Winter),
the gasket may not fit perfectly to the cabinet. In
that case, wait for the natural fitting of the gasket.
In case you do not want to carry out the above
mentioned operations, contact the nearest After
Sales Service Force. The After Sales Service spe-
cialist will carry out the reversibility of the doors at
your cost.
electrolux 11