Electrolux EKM51302OX, Руководство пользователя

Страница: 10 / 32

In the absence of electricity
you can ignite the burner
without an electrical device.
In this case approach the
burner with a flame, push
the relevant knob down and
turn it to maximum position.
Keep the knob pushed for
equal or less than 10
seconds to let the
thermocouple warm up.
If the burner accidentally
goes out, turn the knob to
the off position and try to
light the burner again after
minimum 1 minute.
The spark generator can
start automatically when you
switch on the mains, after
installation or a power cut. It
is normal.
5.2 Burner overview
A
B
D
C
A. Burner cap
B. Burner crown
C. Ignition candle
D. Thermocouple
5.3 Turning the burner off
To put the flame out, turn the knob to the
off position .
WARNING!
Always turn the flame down
or switch it off before you
remove the pans from the
burner.
5.4 Heat setting for the electric
cooking zone
Sym‐
bols
Function
Off position
1 - 6 Heat settings
Use the residual heat to
decrease energy
consumption. Deactivate the
cooking zone approximately
5 - 10 minutes before the
cooking process is
completed.
Turn the knob to a necessary heat
setting.
To complete the cooking process, turn
the knob to the off position.
5.5 Using the rapid hot plate
A red dot in the middle of the plate
shows a rapid hot plate. A rapid hot plate
heats up faster than usual plates. The
red dots are painted on the plates. They
can deteriorate during use and even
disappear completely after a period of
time. It does not have an effect on the
performance of the hob.
6. HOB - HINTS AND TIPS
WARNING!
Refer to Safety chapters.
6.1 Cookware
Electric:
www.electrolux.com 10