5
www.electrolux.com
www.electrolux.com
CNT
CNS
KR
ID
TH
VN
EN
COMPONENTS
A.
Motor head (tiltable)
B.
Speed selector
C.
Main body
D.
Tilt head locking button
E.
Front attachment hub
F.
Front attachment hub release lever
G.
Rear attachment hub cover
H.
Attachment shaft
I.
Stainless steel bowl
J.
Pouring shield
K.
Pouring hole
L.
Bowl locking plate
M.
Non-slip feet
N.
Power cord
O.
Whisk
P.
Flat beater
Q.
Dough hook
R.
Salad maker *
S.
Food pusher (salad maker)*
T.
Meat grinder *
U.
Food tray*
V.
Food pusher (meat grinder)*
W.
Blender*
X.
Blender lid with measuring cup*
* Certain models only
GETTING STARTED
1
Before using your appliance for the first time:
Remove all packing material such as plastics, labels,
stickers or tags that may be attached to the main body, bowl or attachments.
Clean the appliance and accessories, see instructions: “Cleaning and Care”.
2
Place the appliance on a dry, level, stable surface. Keep it away from the countertop edge.
Push
the tilt head locking lever with one hand and tilt the motor head up with the other hand. Once in up
position, it is locked with a “click”.
Caution!
Ensure that the power cord is unplugged.
Warning:
Keep fingers and hands away from areas with movable parts.
3
Set the speed selector to “0”.
Place the stainless steel bowl on the bowl locking plate.
Rotate the
bowl clockwise to lock it into position.
Warning:
Never operate the appliance with the whisk, flat beater or dough hook unless the bowl is in
place.
4
Place an attachment on the attachment shaft:
Align the slot at the top of the attachment with the
pin on the attachment shaft. Push the attachment up and turn it anti-clockwise until the pin is locked
into position. To remove the attachment, push the attachment upwards, move it clockwise and pull
down and out.
5
Tilting the motor head down:
Push the tilt head locking button with one hand and tilt the motor head
down with the other hand. Plug in and switch on the appliance.
Warning:
Keep fingers and hands away from areas with movable parts.
6
Gently place the pouring shield on top of the bowl. Attach the pouring hole by hooking it to the
catch of the pouring shield. Only add ingredients using the pouring hole.
7
Move the speed selector from “0” to desired speed (1-6).
Note:
Always start on the slowest speed to avoid splashing ingredients out of the bowl.
Once mixing is complete, turn the speed selector to “0” and unplug the appliance.
8
If the speed selector is left in speed mode (1-6)
before the appliance is plugged in and, the appliance
will not start automatically. Turn the speed selector to “0”, then turn it to the desired speed.
CLEANING AND CARE
9
Switch off the appliance,
remove the plug from the wall socket and wait until the appliance stopped
completely. Wash all parts, except for the motor head and main body, in warm soapy water. Dry
each part thoroughly before the next use.
The bowl, flat beater and dough hook are dishwasher-safe. If using the dishwasher, place parts
only on the top rack of the dishwasher.
Warning!
Never immerse the motor head, main body, plug, or cord in water or any other fluid.
